Tag Archives: hot foiling

Trying Out the Stampin’ Hot Foil System

New Stampin' Hot Foil System First Try

My new Stampin’ Hot Foil System arrived the other day along with a few dies, stamp sets, and foil. It took another day or two to find a block of time to try it out. I admit I was a nervous wreck checking and rechecking the directions at first, so I didn’t make a mistake and ruin the whole thing. However, even my first attempt turned out BEAUTIFUL and PERFECT. I would say it looks “professional”. And that was just my first try!

Here is my FIRST TIP!! Your system will come in a variety of boxes. When you take the power cord out of its box, be sure you also take out the little extension plug, I’ll call it. I took out the main power cord, with a big black box attached. I set up all my supplies for the hot foiling and when I went to plug in the platform, the plug did not match the outlet on the side!! I thought I would be calling Stampin’ Up! today and probably would have to send the whole thing back because obviously I got the wrong thing. I checked all the numbers on my order and the box. I knew the plug is actually magnetic, but this thing did not match at all. When I told my husband about this major problem, he looked in the box and there was a short little cord with the correct plug on the end that I needed to connect to the other big cord! My HERO!! I was thrilled that I had everything I needed and glad I had not thrown out the boxes before using the whole system! So KEEP your boxes, just in case. If anything was wrong, you would want those boxes if you had to return the system. And look for that extra little cord and plug!

The next day I got everything set up again and tried it out! Everything worked perfectly! Make sure you have the little pamphlet of instructions handy and be sure you read them. I think there is just a little learning curve on the initial set up and steps, but we will all get the hang of it quickly!

My favorite hot foil die is the Garden Silhouette Hot Foil Die. It is one big die. After foiling your paper, you can cut it down to fit your card front or whatever size you want it. I used my Paper Trimmer and it worked fine. The Paper Trimmer worked fine with cutting the piece of foil, too, but you can also use a scissors. Another tip: Save your used pieces of foil in a folder or box because there are ways to reuse them.

New Stampin' Hot Foil System First Try

The foil on the Basic White Cardstock just looks perfect!! Below is the card I made with it. I decided to put it on a card base of Melon Mambo. The greeting is in the Scalloped Blooms Stamp Set. It is stamped in Melon Mambo ink. However, if you wanted it extra-fancy, you could dry emboss (our old method with the Heat Tool and powder) the greeting in gold. I layered it on a piece of Gold Foil. The ribbon is the Gold Striped 3/8″ Mesh Ribbon, which is currently unavailable but due back in stock the week of September 14th. You can use whatever you have. Another ribbon that is retired I believe, that looks good with this card is the White With Gold 3/8″ Ribbon in the Spring Mini on page 24. You may have that. I adhered a piece of ribbon from top to bottom wrapped around on the ends to the back of my hot foiled piece, then added a large bow separately with Mini Glue Dots on top of the ribbon.

Garden Silhouette Foil Birthday Card

Here is the inside of the card. I added a Basic White layer on which to stamp or write a message. Along the side I added a scrap of hot foiling that I had cut off the Garden Silhouette piece to make it fit on my card front. Depending on what you cut off as scrap, you might save those pieces and maybe you can use them in some way!

Garden Silhouette Foil Birthday Card Inside

I thought the Butterfly Flight Dies would be the most popular, but apparently it is the Garden Silhouette Hot Foil Die because it is “currently unavailable”. If you want this die, please put your email in the notification box when you look up that die, and Stampin’ Up! will email you when it is back in stock. Then jump on it, if you can, because sometimes a popular item sells out again as fast as it is back in stock.

If you do not want the Stampin’ Hot Foil System, do not look at any videos online of Stampin’ Up! Demonstrators and Customers enjoying their new toy! Everyone seems so thrilled, so do not watch and get taken in by all the excitement!! :). You may not be able to resist!! Don’t forget – even though it is a big investment, you will earn Rewards to use on future orders and/or you can apply any Rewards you already have to bring down the cost (a little!). You know how creative all these stampers are, so I think we are only at the beginning of what we can do with hot foil! Plus, you receive the Metallic Craft Class FREE with the purchase of the system before January 2027! You can watch it any time and as many times as you like.

SHOP THE STAMPIN’ HOT FOIL SYSTEM and MORE HERE!

TODAY!! New Hot Foil System Available at Stampin’ Up!

Metallic Magic Ad

Stampin’ Hot Foil System! Get it today in the Stampin’ Up! Online Store!

I would say in all my years at Stampin’ Up!, this Stampin’ Hot Foil System is the biggest thing since the first Big Shot came out! Stampin’ Up! says it was quite popular during the Demonstrator opportunity to preorder recently so they expect that Customers will love it too, and it could go on backorder for a while. They have already ordered more supplies, but if you don’t want to wait, you might want to order it very soon!

While the main thing is the Hot Foil System itself, you will also need the Stampin’ Cut & Emboss Machine. Stampin’ Up! has tested the Hot Foil System with our current products, and that is how they can offer a 1-year limited warranty on the system as long as you are using Stampin’ Up! products. The hot foil dies are different from our usual die-cutting dies so you do need to use the appropriate ones.

I’m sure there is a bit of a learning curve, but from the videos I have watched, it looks like we will all catch on pretty quickly! You just plug in the platform, let it heat up, lay the die on it, let it heat up, then make the sandwich with the foil, paper, and other two pieces. Pick it up and run it through the Stampin’ Cut & Emboss Machine SLOWLY, they say! Then peel off the foil and prepare to be amazed at the beautiful piece you have just created!

I do not doubt that as more and more people get the hot foiling system in their hands, we will all learn more tips and tricks and get many more ideas for things to make and card designs! Just like when a new stamp set comes out, and stampers come up with the most amazing projects that we all benefit from!

Watch this Stampin’ Up! video and see how it all works.

I put in my order last night and am excited to get it! At first, I wasn’t sure I “needed” it, but in the end I could not resist and did not want to wait if things sold out! It is an expense, especially with the dies and things you need, just like buying stamp sets, but you do get the virtual Metallic Magic Craft Class for FREE (do not add it to your order; it is included with the system for free) AND you do get 10% in Rewards to use on future purchases within a year. (You do need to have a Stampin’ Up! account to earn Rewards. It’s easy to do.) You can order the system, the gold and silver foil (I held off on the pink for now), and then choose which dies you like the most. Please look at the Bundles, especially, and save 10% off the cost of purchasing the two items separately, like our stamp set bundles. You don’t need ALL of them right now. Some have a matching stamp set, the butterfly dies have masks for coloring in, and some items are stand-alone, like the Garden Silhouette Die.

Go check out the Stampin’ Foil System in the Online Store and/or download the Metallic Magic Brochure and see what you like!

SHOP HERE!

METALLIC MAGIC BROCHURE HERE!

New Product! Stampin’ Hot Foil System! Coming Friday!

This new Stampin’ Hot Foil System from Stampin’ Up! is coming to all markets this Friday, July 10th at midnight! If you want to be one of the first to own this new system by Stampin’ Up! and if you don’t want to wait in cases it sells out, be sure to order early! This new system has been “top secret” for a little while until Stampin’ Up! had enough supplies stocked up and ready for customers to order. That day is Friday!!

What is Hot Foil? Hot foiling is a technique that uses heat and pressure to transfer metallic or colored foil onto paper, cardstock, and more. The result is a shiny, professional-looking finish, similar to what you see on luxury stationery or packaging. You can experiment with foiling on different materials to see what shines.

What is the Stampin’ Hot Foil System? The Hot Foil System comes with these products:

Hot Foil System Photo

  • On the left, you see the platform that heats up and the silicone mat that it sits on to protect the surface. It takes 6 minutes to heat up initially, but then stays warm while you work on your projects.
  • To the right, you see the green hot foil shim and the clear hot foil spacer, two pieces you put on the hot platform as you build the sandwich.
  • Above those two pieces, you see another silicone mat on which to place the hot dies.
  • The white tool at the top is the magnetic pick up tool, to pick up hot dies from the platform.

You will also need the Stampin’ Cut & Emboss Machine. Stampin’ Up! is aware of many similar products out there, but you will need to use Stampin’ Up! products with this Hot Foil System for the 1-year limited warranty because they know these products work with the system.

Purchase the Stampin’ Hot Foil System and receive the virtual Metallic Magic Craft Class (a $30 value) FREE until January 4, 2027. You will also need to purchase the Stampin’ Hot Foil Rolls and Hot Foil dies to complete the hot foil process. The Foil and Dies are sold separately.

Stampin’ Hot Foil System and Craft Class (170009) $160.00

Available in my Stampin’ Up! Online Store on Friday, July 10, 2026!

Metallic Magic Hot Foil Brochure Cover

Page through the brochure above to learn all about the new Stampin’ Hot Foil System! Just click!

Things to Know:

  • You can foil on a variety of products such as cardstock (Two-Tone and White Willow are recommended), designer series paper, Stampin’ Up! Vellum, window sheets, and pearlized specialty paper. Porous or textured papers may give inconsistent results.
  • The cutting dies we already have are not designed to be used with hot foiling, and you can’t die cut using foiling dies. They are different and you may risk damaging the dies and the system.
  • Go slow when running the foil sandwich through the Cut & Emboss Machine.
  • Use any Rewards you have to purchase the Hot Foil System and/or earn Rewards when you purchase the system and the other products like dies and foil rolls. That helps with the expense!

I think this covers a lot of information, but we will all learn a lot more as more people get this foiling system in their hands and begin using it, just like when new catalogs come out and we see what everyone is doing with the new stamps and products! It will be a fun adventure, I’m sure. Maybe a bit of a learning curve, but the ladies in the video say we will catch on quickly after just a couple of tries!

More to come, but check out the brochure above (you can print it out if you like) and see that you think!

SHOP THE STAMPIN’ UP! HOT FOIL SYSTEM FRIDAY, JULY 10th!!